With any Cassegrain telescope you will have to consider the affect dew fall. The cheapest solution is a lens hood but when dew is a real problem then heater straps will evaporate dew off.

HD FEATURES

• New aplanatic Schmidt telescope design produces aberration-free images across a wide field of view
• Mirror tension locks hold the primary mirror in place and reduce image shift
• Cooling vents allow hot air to be released from behind the primary mirror
• Fastar compatible for fast f/2 imaging

COMPUTERIZED MOUNT FEATURES:

NEW CGX-L FEATURES

Increased 75 lb load capacity.  Exceptional load capacity to weight ratio

Additional Aux accessory ports and autoguider port on the Dec axis for better cable management

Larger 144 mm diameter worm wheels to better and more accurately drive heavier loads

Longer 270 mm dovetail saddle to better support larger optical tubes

Massive 70 mm stainless steel tripod legs with a wider stance for improved stability under heavy loads

New accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet

Heavy duty, 31.5 mm stainless steel counterweight shaft to support additional counterweights

Optional add-on polar axis finderscope custom designed for CGX and CGX-L

Supports WiFi and wireless operation accessories such as StarSense AutoAlign and SkyPortal WiFi Module (sold separately)

MOUNT FEATURES:

Compact, lower profile equatorial head provides improved stability and portability. Sturdier and more rigid with quicker dampening time

Improved motors provide more torque, better slewing and tracking under heavy loads

Heavy duty belt-drive system minimizes backlash while providing smooth motor operation at full capacity

Clear windows built into motor covers so pulleys and belts can be monitored

Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh

Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags

Internal hard stops for both axes prevent cable tension and tripod strike

Internal optical sensors on both axes for simple and safe remote operation

-Home sensors allow the mount to always start in the index position regardless of orientation before a power reset

-Limit sensors automatically shut off slewing or tracking before reaching the hard stop fail safe

Includes Celestron’s new PWI telescope control software, co-developed by PlaneWave Instruments.  Software features multi-point mount modeling for extremely precise pointing accuracy

Software Polar Align: “All-Star Polar Alignment” allows quick and very precise polar alignment. Align on any bright named star without extra polar alignment accessories, apps, or other assistance

Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3º-65º latitude range

Dual-fit Vixen/CG-5 and Losmandy/CGE dovetail saddle

+20º of additional tracking past the meridian on either side

Redesigned tripod has a widened stance for added stability. The minimum tripod height has also been lowered per user feedback

Tripod legs can be collapsed with accessory tray installed for faster setup and transport

IMPROVED ERGONOMICS:

Integrated handles for easy transport and portability

All-new ergonomically designed dovetail clamping knobs

Innovative and improved polar alignment adjustment system

All-new ergonomic adjustment knobs with reduced friction for smooth and easy positioning under full loads. Stationary latitude knob with a newly-designed linkage system greatly reduces the amount of friction when polar aligning the mount. Redesigned azimuth adjustment with low-friction Teflon bearings to make adjustments easy under full load.  No more binding, rough adjustments!

Easy to read latitude scale

ELECTRONICS:

NexStar+ hand control with USB port

USB 2.0 port used to connect directly to PC with PWI Software

2 available autoguider ports for optimum cable management

PEC sensor and PPEC ready

Threaded 12VDC power input barrel connector

Internal Real Time Clock (keeps time and site information saved)

On/Off rocker switch with red LED

WIFI		Celestron’s telescopes reach a new level with integrated WiFi! Leave your hand control behind and slew to all the best celestial objects with a tap of your smart device. Connect your device to your WiFi telescope’s built-in wireless network and explore the universe with Celestron’s SkyPortal mobile app for iOS and Android. Or upgrade your compatible Celestron computerized telescope with the SkyPortal WiFi module. SkyPortal provides full wireless control of your telescope and turns your smart device into your own personal planetarium and observatory!
SKYPORTAL		Celestron’s newest planetarium app is an astronomy suite that redefines how you experience the night sky. Explore the Solar System, 120,000 stars, over 200 star clusters, nebulae, galaxies, and dozens of asteroids, comets, and satellites—including the ISS. SkyPortal includes everything you need to experience the night sky in an exciting new way.
STARSENSE		With Celestron’s patented StarSense Technology, telescope alignment has never been easier! Just attach the StarSense AutoAlign accessory, push the Align button on the hand control or smart device, and StarSense begins capturing and comparing images of the night sky against its internal database. In about three minutes, it’s gathered enough information to triangulate its position and align itself. Then, press the Sky Tour button: StarSense will automatically slew to all the best stars, planets, galaxies, and more currently visible in the night sky.